Archive

Posts Tagged ‘Cumulative Update’

Cumulative Update 1 for Configuration manager 2012 SP2 and R2 SP1 released!

August 7, 2015 Leave a comment

metrofixEarlier this week Microsoft has released Cumulative Update 1 for Configuration manager 2012 SP2 and R2 SP1.

The cumulative update contains a series of fixes for the following components:

  • Console
  • Client
  • Site Systems
  • Content Management and Software Distribution
  • Operating System Deployment (including Windows 10 driver import)
  • Hybrid setups (Intune) and MDM
  • Reporting

Next to these fixes there are also updates for Asset Intelligence, SCEP and Debian 8.

More details and download location can be found in KB3074857.

Until next time!

Tim

Advertisements

Implementing Configuration Manager 2012 R2 Cumulative Update 5

May 17, 2015 Leave a comment

As mentioned during one of my previous blog posts Microsoft has recently released Cumulative Update 5 for Configuration Manager 2012 R2. This blog post will outline how to implement this Cumulative Update and is based on the steps I followed during the implementation in my lab environment.

Note: this week Microsoft has also released Service Pack 1 for Configuration Manager 2012 R2. The logical question pops up whether to still install this Cumulative Update or immediately go for the Service Pack. Technically there are no constraints for implementing the Service Pack straight away (the CU is not a prerequisite) however my current preferred way to go is to implement the CU first. Based on experiences from the past there could always be some subtle differences, and it seems my friend Kenny already found one here as well.

Now back to implementing the CU. First step is to get the sources. The KB article also gives a full overview of the fixes and improvements in this update. As the name indicates, this update also contains all elements fixed or added in one of the previously released CU’s.

Note that this update is only applicable to Configuration Manager 2012 R2 – if you are currently still running Configuration Manager 2012 SP1 the latest available cumulative update is CU5.

The CU is applicable directly to the following components:

    • CAS
    • Primary Sites (standalone or in a hierarchy)
    • Secondary Sites
    • SMS Provider(s)
    • Console(s)

    Additionally it contains updates for the following components:

    • CAS
    • Primary Sites
    • Secondary Sites
    • SMS Provider(s)
    • Consoles
    • Clients

    The lab we are upgrading does not contain all the components listed above, a CAS and Secondary Site(s) are not present.  The SMS Provider is installed locally on the site server.

Primary site

Cumulative Updates for Configuration Manager are implemented top-down so we start with the site server of the standalone primary site. Before running the installer with elevated privileges ensure there are no more active console connections.

image

The Installation Wizard is started.

image

Click next on the Welcome page.

image

Accept the license terms and click Next.

clip_image001

Verify all prerequisite checks are successful and click Next.

clip_image002

Leave the default option to install the update for the console and click Next.

clip_image003

Leave the default option to update the site database and click Next.

image

Leave the default option for package creation and click Next.

clip_image005

Leave the default settings for the server package and click Next.

clip_image006

Leave the default settings for the console package and click Next.

clip_image007

Leave the default settings for the client packages and click Next.

clip_image008

Review the setup summary and click Install.

image

The installation begins and progress is shown. Click Next when finished.

Note: during the implementation I had noticed that the installer was hanging long time on the first step to stop the services. In this case manually stopping the WinMgmt service (net stop winmgmt from an elevated command prompt) was needed to make the installation continue.

image

All done! Click Finish and reboot the system.

image

The technical details about the installation and what is happening behind the scenes is logged the log file cm12-r2cu5-kb3054451-x64-enu.log  located in the %windir%\temp folder.

Now lets do a few verification steps to see if the update got implemented properly.

First checkpoint are the entries in Programs and Features > view installed updates:

image

Next is the registry in HKLM\Software\Microsoft\SMS\Setup

image

And a final check in the console (About Configuration Manager)

image

As we opted to have some packages created to support implementing the CU in our environment these should now also be visible in the console. Go to the software library and select packages. Select the Configuration Manager Updates folder and then type CU5 in the search box to quickly locate those packages.

image

Important: Do not forget to distribute the content of these packages to your Distribution Points!

Important (2): Do not forget to update your boot images. This can be done by selecting a boot image, right-clicking it and then selecting the action to Update Distribution Points.

Secondary Sites

If there are any Secondary Sites in your environment the next step is to implement the CU on those sites. The server update package can be used to automate this. To target the site servers a collection can be built which is populated based on the following query:

    • select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name, SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,
      SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS_64 on SMS_G_System_ADD_REMOVE_PROGRAMS_64.ResourceId = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS_64.DisplayName = "System Center 2012 R2 Configuration Manager Secondary Site Setup"

Consoles

    As part of the implementation process on the site server the locally installed console was updated. Any remaining remote consoles in the environment can be updated using the console upgrade package.

    To build a collection containing the machines with the console installed the following query could be used:

  • select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name, SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM. ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceId = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName = "System Center 2012 R2 Configuration Manager Console"

     

  • Clients

    Last but not least we also need to get the CU installed on our clients. There are multiple approaches to accomplish this; one method could be to deploy the client update packages created automatically during the implementation process.

    As there is a package per processor architecture we will also create matching collections to target our deployments. This is an example query for a collection containing all 64-bit clients with a client version not equal to CU5:
  • select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name, SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,
    SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_SYSTEM on SMS_G_System_SYSTEM.ResourceID = SMS_R_System.ResourceId where SMS_R_System.ClientVersion != "5.00.7958.1601" and SMS_G_System_SYSTEM.SystemType = "X64-based PC"
    The query for the collection with 32-bit clients is identical; just replace “x64-based PC” with “x86-based PC”.

Clients with CU5 will have the following version shown on the properties tab:

image

Version numbers for some of the components are also updated:

imageimage

That’s all for now – Until next time!

Tim

Cumulative Update 5 for System Center 2012 R2 Configuration Manager released!

May 6, 2015 1 comment

metrofixIn between all the announcements and other stuff that is going on at the Ignite conference Microsoft has also released Cumulative Update 5 for System Center 2012 R2 Configuration Manager today.

This CU contains some important bug fixes and performance improvements. Read about the issues that are fixed and additional functionality this CU has to offer in KB3054451 .

Blog post with more details on how to implement this CU will follow soon.

Until next time!

Tim

Implementing Configuration Manager 2012 R2 Cumulative Update 4

February 4, 2015 Leave a comment

Earlier on I have installed the newly released Cumulative Update 4 for Configuration Manager 2012 R2 in my lab. This blog post outlines the steps done during this implementation and can be used as a step by step guide.

First step is to get the sources for the CU here. The KB article also gives a full overview of the fixes and improvements in this update. As the name indicates, this update also contains all elements fixed or added in one of the previously released CU’s.

Note that this update is only applicable to Configuration Manager 2012 R2 – if you are currently still running Configuration Manager 2012 SP1 the latest available cumulative update is CU5.

The CU is applicable directly to the following components:

    • CAS
    • Primary Sites (standalone or in a hierarchy)
    • Secondary Sites
    • SMS Provider(s)
    • Console(s)

    Additionally it contains updates for the following components:

    • CAS
    • Primary Sites
    • Secondary Sites
    • SMS Provider(s)
    • Consoles
    • Clients

    The lab we are upgrading does not contain all the components listed above, a CAS and Secondary Site(s) are not present.

    Primary site

    Cumulative Updates for Configuration Manager are implemented top-down so we start with the site server of the standalone primary site. Before running the installer with elevated privileges ensure there are no more console connections.

image

 

The installation wizard kicks off.

clip_image001

On the welcome screen, click next.

clip_image002

Accept the License Agreement and click Next.

clip_image003

Verify the prerequisite checks and click Next.

clip_image004

Leave the option to update the locally installed console.

clip_image005

Leave the option to update the site database and click Next.

clip_image006

During the setup process we can opt to create packages to support updating other components in the infrastructure. Leave the options to have these packages created and click Next.

clip_image007

Leave the default settings for the servers package and click Next.

clip_image008

Leave the default settings for the console package and click Next.

clip_image009

Leave the default settings for both the x86 and x64 client package and click Next.

clip_image010

Review the setup summary and click Install when ready.

clip_image011

Progress is shown for each action.

clip_image012

Install completed! Click Finish to close the wizard.

Notice the mention that a reboot is required.

clip_image013

If you are interested in the more technical details about the installation and would like to see what is happening behind the scenes, have a look at the log file cm12-r2cu4-kb3026739-x64-enu.log  located in the %windir%\temp folder.

After the installation you can do a few verification checks to see if the CU got implemented.

First one is to look for the following entries in Programs & Features > View Installed Updates.

clip_image014

Second one would be to look in the registry in HKLM\Software\Microsoft\SMS\Setup

image

And lastly you can also check the version in the console (see About Configuration Manager):

image

 

As we opted to have some packages created to support implementing the CU in our environment these should now also be visible in the console. Go to the software library and select packages. Select the Configuration Manager Updates folder and then type CU4 in the search box to quickly locate those packages.

image

Important: Do not forget to distribute the content of these packages to your Distribution Points!

Important (2): Do not forget to update your boot images. This can be done by selecting a boot image, right-clicking it and then selecting the action to Update Distribution Points.

Secondary Sites

If there are any Secondary Sites in your environment the next step is to implement the CU on those sites. The server update package can be used to automate this. To target the site servers a collection can be built which is populated based on the following query:

    • select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name, SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,
      SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS_64 on SMS_G_System_ADD_REMOVE_PROGRAMS_64.ResourceId = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS_64.DisplayName = "System Center 2012 R2 Configuration Manager Secondary Site Setup"

Consoles

    As part of the implementation process on the site server the locally installed console was updated. Any remaining remote consoles in the environment can be updated using the console upgrade package.

    To build a collection containing the machines with the console installed the following query could be used:

  • select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name, SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM. ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceId = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName = "System Center 2012 R2 Configuration Manager Console"

    Clients

    Last but not least we also need to get the CU installed on our clients. There are multiple approaches to accomplish this; one method could be to deploy the client update packages created automatically during the implementation process.

As there is a package per processor architecture we will also create matching collections to target our deployments. This is an example query for a collection containing all 64-bit clients with a client version not equal to CU4:

  • select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name, SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,
    SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_SYSTEM on SMS_G_System_SYSTEM.ResourceID = SMS_R_System.ResourceId where SMS_R_System.ClientVersion != "5.00.7958.1501" and SMS_G_System_SYSTEM.SystemType = "X64-based PC"
    The query for the collection with 32-bit clients is identical; just replace “x64-based PC” with “x86-based PC”.

A client with CU4 installed will display the following version in its properties:

image

Version numbers for some of the components are also updated:

imageimage

 

As you can see the experience for implementing this CU is pretty straightforward and identical to the previously released CU’s.

Until next time!

Tim

Cumulative Update 4 for System Center 2012 R2 Configuration Manager released!

February 3, 2015 Leave a comment

metrofixMicrosoft has released Cumulative Update 4 for System Center 2012 R2 Configuration Manager.

This CU includes a large list of fixes for various issues. Details on those fixes and information on added functionality can be found in KB3026739.

PowerShell changes are documented in a separate KB article KB3031717. Additionally the update includes performance optimizations for data replication, an Endpoint Protection platform update (KB2998627) and OS Support for Max OSx 10.10 and Suse Linux Enterprise Server 12.

A few interesting reads about this CU which were published earlier today:

Until next time!

Tim

Cumulative Update 3 for System Center 2012 R2 Configuration Manager released!

September 24, 2014 Leave a comment

Yesterday Microsoft has made available Cumulative Update 3 for System Center 2012 R2 Configuration Manager.

Details on the issues that were fixed, and other additional changes introduced by this CU, can be found here: http://support.microsoft.com/kb/2994331

As we saw with earlier Cumulative Updates the changes related to Powershell are documented in a separate article. Read more about those here: http://support.microsoft.com/kb/2999304

Stay tuned for more details on how to implement this CU soon.

Tim

Week in Review – CW30

July 27, 2014 Leave a comment

Last week I was on vacation so I skipped my weekly review. I am not back in full force yet but did have some time to check the radar and list up some interesting blips. Here they are for this week:

Tim